Wolfgang Warmbier ESD Floor Stripper
Wolfgang Warmbier ESD Floor Stripper is a high quality floor stripping treatment designed for use on ESD floors for the safe and effective removal of existing floor polishes, coatings or heavy contamination. Use to restore the ESD floor performance or use prior to application of Wolfgang Warmbier ESD Floor Finish.
Supplied in 5 litre containers.
Coverage approximately 10 m2 per litre of concentrate. A test area is recommended prior to treatment.
Please note: this product is not suitable for use on linoleum flooring material.
(Application and product safety data sheet can be found in Product Information below).
Wolfgang Warmbier ESD Floor Stripper (Product code: 14012)
Wolfgang Warmbier ESD floor stripper is formulated for the safe and effective removal of existing floor polishes or coatings prior to application of ESD floor finish. It is not suitable for use on linoleum flooring material.
Applying the stripper:
1. Dilute 1 litre of floor stripper to 4 litres of tap water, apply with a mop to remove existing coating and allow it to react for 5 – 10 minutes.
2. Remove any residue and then rinse the floor with tap water prior to application of ESD floor finish.
3. Repeat the process as necessary for heavily contaminated floors.
Coverage:
Approximately 10 m2 per litre of concentrate.
Storage:
Protect from frost and heat. The stripper can be stored for up to 24 months. After opening, the ESD floor stripper should be used within 12 months.
Quantity:
5 litre container
Browser not supported
We recommend that you use the latest version of Chrome, Edge or Firefox.
£32.00
Technical Specification
Part of the Wolfgang Warmbier floor treatment range.
For regular and periodic cleaning use the Wolfgang Warmbier ESD Floor Cleaner. For poor performing or non-ESD floors use the Wolfgang Warmbier Floor Finish to create a short-term ESD floor solution or for areas with low traffic and low ESD risk.
